Centrifugal dewatering pumps are the value alternative for keeping jobsites dry
WACKER's PG dewatering pump series has been designed to handle the removal of relatively clean job-site water.
With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.
Features and benefits
- Cast iron impeller and volute are wear resistant for long life and minimal service.
- Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
- High strength lightweight diecast aluminum housing increases the years of trouble-free pump life.
- A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.
- Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters.
| Description | Metric | Imperial | ||
| Suction & discharge diameter | 75 | mm | 3 | in |
| Length x width x height | 515 x 405 x 460 | mm | 20 x 16 x 18 | in |
| Operating weight | 31 | kg | 69 | lb |
| Shipping weight (including packaging) | 34 | kg | 75 | lb |
| Shipping size | 540 x 430 x 490 | mm | 21 x 17 x 19.5 | in |
| Max. head | 30 | m | 98 | ft |
| Max. discharge | 1.000 | l/min | 264 | US gpm |
| Max. suction lift | 7,5 | m | 25 | ft |
| Solid size capacity | 6,5 | mm | .25 | in |
| Engine Type | air-cooled, 4-cycle, single cylinder, gasoline engine Honda | |||
| Displacement | 163 | cm3 | 9.9 | in3 |
| Max. power output | 4,1 | kW | 5.5 | hp |
| at | 3.600 | 1/min | 3,600 | rpm |
| Operating power | 3,7 | kW | 5.0 | hp |
| at | 3.600 | 1/min | 3,600 | rpm |
| Fuel tank capacity | 3,6 | l | 3.8 | US qt |
| Fuel consumption | 1,8 | l/h | 1.9 | US qt/h |
Discounted at only: US$ 579.99 
Niciun comentariu:
Trimiteți un comentariu